M5LV-512/120-15YI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-512 |
| Pin Count | 160 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Number of Gates | 20000 |
| Max Frequency | 55.6MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 15ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-512/120-15YI Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 160-BQFP package containing it.As you can see, this device has 120 I/O ports programmed into it.There is a 160terminations set on devices.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the MACH? 5 series.160pins are programmed on the chip.This device also displays [0].You can find its related parts in the [0].There are 20000 gates, which are devices that acts as a building block for digital circuits. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.Data is stored using [0].In this case, the maximum supply voltage is 3.6V.A minimum supply voltage of 3V is required for this device to operate.There are 44 programmable I/Os in this system.The maximum frequency should not exceed 55.6MHz.
M5LV-512/120-15YI Features
160-BQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
M5LV-512/120-15YI Applications
There are a lot of Lattice Semiconductor Corporation M5LV-512/120-15YI CPLDs applications.
- Digital multiplexers
- Complex programmable logic devices
- Handheld digital devices
- Multiple DIP Switch Replacement
- Power up sequencing
- Code converters
- High speed graphics processing
- Wide Vin Industrial low power SMPS
- ON-CHIP OSCILLATOR CIRCUIT
- Voltage level translation
