M5LV-512/120-6YC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-512 |
| Pin Count | 160 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 6.5 ns |
| Number of Gates | 20000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 6.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5LV-512/120-6YC Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.160-BQFPis the package in which it resides.There are 120 I/Os programmed in it.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the MACH? 5 series.It is equipped with 160 pin count.This device can also display [0].According to the M5LV-512, its related parts can be found.The 20000gates serve as building blocks for digital circuits.Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].In this case, the maximum supply voltage is 3.6V.It operates with the minimal supply voltage of 3V.Currently, there are 48 Programmable I/Os available.It is recommended that the maximal frequency be lower than 125MHz.
M5LV-512/120-6YC Features
160-BQFP package
120 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
M5LV-512/120-6YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-512/120-6YC CPLDs applications.
- Power up sequencing
- Programmable power management
- Software-driven hardware configuration
- STANDARD SERIAL INTERFACE UART
- INTERRUPT SYSTEM
- High speed graphics processing
- Power automation
- PLC analog input modules
- Boolean function generators
- Dedicated input registers
