Parameters |
Mounting Type |
Surface Mount |
Package / Case |
352-LBGA |
Supplier Device Package |
352-SBGA (35x35) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Published |
1995 |
Series |
MACH® 5 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Base Part Number |
M5LV-512 |
Operating Supply Voltage |
3.3V |
Programmable Type |
In System Programmable |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
256 |
Memory Type |
EEPROM |
Number of Gates |
20000 |
Max Frequency |
100MHz |
Number of Programmable I/O |
256 |
Number of Macro Cells |
512 |
Voltage Supply - Internal |
3V~3.6V |
Delay Time tpd(1) Max |
7.5ns |
RoHS Status |
Non-RoHS Compliant |
M5LV-512/256-7SAI Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the 352-LBGA package.The device is programmed with 256 I/Os.Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the MACH? 5 series.The M5LV-512can be used to identify its related parts.In digital circuits, there are 20000gates, which act as a basic building block.The supply voltage should be maintained at 3.3V for high efficiency.Data storage is performed using [0].It operates at a maximum supply voltage of 3.6V volts.It operates with the minimal supply voltage of 3V.A total of 256Programmable I/Os are present.Ideally, the maximal frequency should be lower than 100MHz Hz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 85°C.
M5LV-512/256-7SAI Features
352-LBGA package
256 I/Os
The operating temperature of -40°C~85°C TA
M5LV-512/256-7SAI Applications
There are a lot of Lattice Semiconductor Corporation M5LV-512/256-7SAI CPLDs applications.
- Dedicated input registers
- White goods (Washing, Cold, Aircon ,...)
- Reset swapping
- I/O PORTS (MCU MODULE)
- POWER-SAVING MODES
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Cross-Matrix Switch
- Bootloaders for FPGAs
- Storage Cards and Storage Racks
- Power Meter SMPS