M74HC109B1R
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 67MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Base Part Number | M74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
M74HC109B1R Overview
16-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. It is configured with Differentialas an output. The trigger configured with it uses Positive Edge. Through Holeis occupied by this electronic component. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a JK Type. It belongs to the 74HCseries of FPGAs. It should not exceed 67MHzin terms of its output frequency. In total, it contains 2 elements. As a result, it consumes 2μA quiescent current and is not affected by external forces. Terminations are 16. It is a member of the M74HC109 family. Power is supplied from a voltage of 4.5V volts. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Through Hole. A total of 16pins are provided on this board. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. A total of 5input lines have been provided.
M74HC109B1R Features
Tube package
74HC series
16 pins
M74HC109B1R Applications
There are a lot of STMicroelectronics M74HC109B1R Flip Flops applications.
- Matched Rise and Fall
- Bus hold
- Memory
- Parallel data storage
- Balanced Propagation Delays
- Computing
- ATE
- Memory
- Instrumentation
- Test & Measurement
