M74HC112RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC112 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 79MHz |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC112RM13TR Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses Negative Edge. Surface Mountmounts this electrical part. A 2V~6Vsupply voltage is required for it to operate. It is operating at -55°C~125°C TA. Logic flip flops of this type are classified as JK Type. In terms of FPGAs, it belongs to the 74HC series. This D flip flop should not have a frequency greater than 79MHz. As a result, it consumes 2μA of quiescent current without being affected by external factors. A total of 16terminations have been recorded. The M74HC112 family contains it. It is powered from a supply voltage of 4.5V. Input capacitance of this device is 5pF farads. A device of this type belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. A Negative Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 2 circuits are used. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL.
M74HC112RM13TR Features
Tape & Reel (TR) package
74HC series
16 pins
M74HC112RM13TR Applications
There are a lot of STMicroelectronics M74HC112RM13TR Flip Flops applications.
- Computing
- Single Up Count-Control Line
- Data Synchronizers
- Shift Registers
- Differential Individual
- Matched Rise and Fall
- QML qualified product
- Frequency Dividers
- CMOS Process
- Pattern generators
