M74HC139RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Throw Configuration | DP4T |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 195 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 39 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M74HC139RM13TR Overview
It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74HC series can be used for a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number of M74HC139 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 4.5V voltage.Signal switch has 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.A total of 16 pins are configured on this board.The mounting point is Surface Mount.There is a family of HC/UH members.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.There are 4 outputs designed for the operation of the turn signal switch.Decoder/Drivers is a category for the digital switch ics.No external influence consumes 4μA current of multiplexer ic.The switches is packaged according to the way of TAPE AND REEL.In the mux switch configuration, there are 2 elements.
M74HC139RM13TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
M74HC139RM13TR Applications
There are a lot of STMicroelectronics M74HC139RM13TR Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Make half adder
- Relay
- Electronics industry
- Medical industry
- Memory chips
- A robotic vehicle with the metal detector
- War field flying robot with a night vision flying camera
- Enabling block of memory depending on address in memory chips
- Transmission from the computer system of a satellite
