M74HC148B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Priority Encoder |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC148 |
| Pin Count | 16 |
| Circuit | 1 x 8:3 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC148B1R Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-DIP (0.300, 7.62mm).Tube is the packaging method.The mounting method digital switch ic uses is Through Hole.The analog IC in the multiplexers is identified as Priority Encoder.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.With the 74HC series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 16 terminations.You can also find related parts by using its logic switch base part number of M74HC148.For multiplexer's system, 4.5V voltage is supplied.In this turn signal switch, there are 16 component pins.Its supply type is Single, which is used as the source of power.The board is configured with 16 pins.As you can see, it is mounted in the direction of Through Hole.In the HC/UH family, the logic switch is included.As a result, signal multiplexer provides 8 bits.Keep Vsup at 2V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 2/6V.I would classify the digital switch ic as an electronic part belonging to the Arithmetic Circuits category.It is possible to accept voltage levels through 8 input lines of multiplexers.A signal source is provided by 3 output lines.
M74HC148B1R Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 2/6V
8 input lines
3 output lines
M74HC148B1R Applications
There are a lot of STMicroelectronics M74HC148B1R Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- CPU memory location identification
- To select different devices in microprocessor input
- Home automation system
- Solenoid cooling fan
- Enabling different rows of memory depending on address in memory chips
- Relay
- GLAN
- Data demultiplexing
- Data distribution
