M74HC151RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Resistance | 1.05kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Propagation Delay | 22 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Voltage Supply Source | Single Supply |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC151RM13TR Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Multiplexers of the 74HC series can be used in a wide range of applications.The basic configuration includes 16 terminations.There is a base part number M74HC151 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 4.5V voltage.Currently, this turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.The logic switch object belongs to the family of HC/UH.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 2/6V.The turn signal switch operates with 1 outputs.In this multiplexer, there is a total of 8 inputs.According to TAPE AND REEL, the switches is packaged.The system operates with a resistance of 1.05kOhm.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.
M74HC151RM13TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
M74HC151RM13TR Applications
There are a lot of STMicroelectronics M74HC151RM13TR Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Microprocessor memory systems
- Arithmetic Logic Units
- CPU memory location identification
- Metal detectors
- Enabling block of memory depending on address in memory chips
- Video transmission
- HDMI applications
- Computer memory
- Telephone network
