M74HC151TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Propagation Delay | 22 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Voltage Supply Source | Single Supply |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC151TTR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 2V~6V, designers have superior flexibility.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.You can also find related parts by using its logic switch base part number of M74HC151.In this case, 4.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.As a type of supply, Single is employed.There are 16 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.During mux switch's normal operation, 2/6V is provided with a power supply.The turn signal switch has 1 outputs designed for operation.There are 8 inputs provided in this multiplexer.In accordance with TAPE AND REEL, switches can be packaged.For the normal operation of the device, 1 circuits must be formed.
M74HC151TTR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
M74HC151TTR Applications
There are a lot of STMicroelectronics M74HC151TTR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Automatic Monitoring systems
- Video transmission
- HD surveillance system
- Encrypted communications system
- CNC machines
- Telephone network
- High-performance memory-decoding applications
- Time division multiplexing system
- Electronics industry
