M74HC155RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC155 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Throw Configuration | DP4T |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 195 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Prop. Delay@Nom-Sup | 39 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC155RM13TR Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.Decoder is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When digital controlled switch operates at 2V~6V, designers have superior flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.The base part number is M74HC155, which is also useful when looking up signal switch's related components.The multiplexer's system works with 4.5V voltage.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.It is positioned in the direction of Surface Mount.There is a family of HC/UH members.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.In the absence of external influences, it consumes 4μA current of multiplexer ic.The switches package is packaged in accordance with the TAPE AND REEL method.It is possible to accept voltage levels through 2 input lines of multiplexers.A signal source has 4 output lines.
M74HC155RM13TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
2 input lines
4 output lines
M74HC155RM13TR Applications
There are a lot of STMicroelectronics M74HC155RM13TR Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Telephone network
- High-performance memory systems
- War field flying robot with a night vision flying camera
- Electronic circuits
- Microprocessor memory systems
- High-performance memory-decoding applications
- Recording transmission
- Arithmetic Logic Units
- Data communication
