banner_page

M74HC161TTR

1 Element 4.5V CMOS DUAL Counters & Dividers 74HC Series M74HC161 16 Pins Up Positive Edge 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-M74HC161TTR
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 961
  • Description: 1 Element 4.5V CMOS DUAL Counters & Dividers 74HC Series M74HC161 16 Pins Up Positive Edge 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature TCO OUTPUT
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number M74HC161
Pin Count 16
Number of Elements 1
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Bits 4
Propagation Delay 21 ns
Turn On Delay Time 300 ns
Reset Asynchronous
Family HC/UH
Logic Function Counter
Direction Up
Logic Type Binary Counter
Trigger Type Positive Edge
Number of Input Lines 4
fmax-Min 25 MHz
Clock Edge Trigger Type Positive Edge
Count Rate 62MHz
Timing Synchronous
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

M74HC161TTR Overview


In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. There are 16 terminations used for its configuration. As a result of the supply voltage of 0, 4.5Vcan operate in a fully flexible manner. An interconnection of 1elements is provided by wires. A total of 16pins are present on all components. As a result, it is packaged as Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. The way of Surface Mount is used to mount it. The HC/UHfamily is derived from it. As a member of the 74HCseries, it is ideal for a wide range of applications. It is adopted that the logic type is [0]. In this case, the operating temperature should be set to -55°C~125°C. This device is mounted in a Surface Mountmanner. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. As far as the device is concerned, there are 4bits of information. In terms of Pbfree code, the result may be yes. It is important to note that TCO OUTPUTare really important features of this electronic device. Further related parts may be found under the base part number M74HC161. TAPE AND REEL is employed for its packing. Voltage from the voltage source is [0]. Supply voltage (Vsup) can be as low as 2V. There is 6V maximum supply voltage (Vsup) allowed. There are a total of 4lines for inputting binary data.

M74HC161TTR Features


Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
TCO OUTPUT

M74HC161TTR Applications


There are a lot of STMicroelectronics M74HC161TTR Counters & Dividers applications.

  • Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
  • Programmable binary and decade
  • Time-delay circuits
  • SQUARING
  • Decade counter/decimal decode display (CD4017B)
  • Programmable decade counters
  • counting/frequency sy nthesizers-BCD output
  • Timing applications
  • Digital multiplexing and demultiplexing
  • MULTIPLICATION

Write a review

Note: HTML is not translated!
    Bad           Good