M74HC163B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 62MHz |
| Base Part Number | M74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 21 ns |
| Turn On Delay Time | 300 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Number of Inputs | 4 |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Gates | 1 |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 12.7mm |
| Length | 25.4mm |
| Width | 12.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC163B1R Overview
This device is packaged in a 16-DIP (0.300, 7.62mm) package. There are 16terminations used for configuring it. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. All component pins are equal to 16. It is packaged in a manner consistent with Tube. To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. The HC/UHfamily includes it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. It is recommended that the operating temperature be set to -55°C~125°C. There is a mounting type of Through Holeon this device. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. Each element in the array stores 4 bits. Based on the Pbfree code, the result may be yes. Among the features of this electronic device, TCO OUTPUTare essential. The base part number of M74HC163provides access to more related parts. In this case, 2/6Vvoltage is generated by the voltage source. It takes supply voltage of 5V to operate. Supply voltages can be as low as 2V volts (Vsup). With a frequency of [0], it operates. A maximum supply voltage (Vsup) is available up to 6V. It receives 4outputs.
M74HC163B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 62MHz
M74HC163B1R Applications
There are a lot of STMicroelectronics M74HC163B1R Counters & Dividers applications.
- Programmable decade counters
- Fixed and programmable counters greater than 10
- Dual Up Counters
- MULTIPLICATION
- Fixed or Programmable Frequency Division
- Communications Digital Frequency Synthesizers;
- Time-delay circuits
- Frequency dividing circuits
- Up Counters
- Signal gating
