M74HC192B1R
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| JESD-609 Code | e3 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Counters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Family | HC/UH |
| Logic IC Type | DECADE COUNTER |
| Max I(ol) | 0.004 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 285 ns |
| fmax-Min | 20 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 17000000Hz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
M74HC192B1R Overview
A PDIPpackage is used for this device. This configuration uses 16terminations. The supply voltage of 4.5V enables it operate in a fully flexible way. The total number of component pins is 16. In this case, it appears as a member of the family [0]. As far as the device is concerned, there are 4bits of information. In regard to this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKare essential features. The device is manufactured at MILITARYdegrees Celsius. From the voltage source, there is a voltage of 2/6V volts. Supply voltage (Vsup) can be as low as 2V. It is possible to supply voltages up to 6V volts (Vsup). The electronic part belongs to the Counters family. A logic IC with the type DECADE COUNTERis used. Temperatures above 125°Care considered to be the maximum operating temperature. Typically, -55°Cis set as the minimum operating temperature.
M74HC192B1R Features
Embedded in the PDIP package
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
DECADE COUNTER as logic IC type
M74HC192B1R Applications
There are a lot of STMicroelectronics M74HC192B1R Counters & Dividers applications.
- SQUARE ROOT
- SQUARING
- Digital multiplexing and demultiplexing
- Frequency dividing circuits
- ALGEBRAIC COMPUTATION
- DIVISION
- Fixed or Programmable Frequency Division
- Time delay circuits
- Timing applications
- Analog multiplexing and demultiplexing
