M74HC251RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC251 |
| Pin Count | 16 |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Propagation Delay | 22 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC251RM13TR Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature of -55°C~125°C will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is M74HC251, so you can find its logic switch related parts using that number.The multiplexer is supplied with 4.5V voltage.Signal switch has 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the HC/UH family.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The multiplexer is equipped with 8 inputs.The switches package is packaged in accordance with TAPE AND REEL.In order to accept voltage levels, the multiplexers have input lines 3 on the board.A signal source is provided by 2 output lines.
M74HC251RM13TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
3 input lines
2 output lines
M74HC251RM13TR Applications
There are a lot of STMicroelectronics M74HC251RM13TR Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Logic gates for other digital devices
- Medium scale TV wall
- Encrypted communications system
- Code conversion
- Communication system
- Analog to digital conversion
- LVDS
- Speed synchronization of multiple motors in industries
- Robotic vehicles
