M74HC259B1R
| Parameters | |
|---|---|
| Height | 12.7mm |
| Length | 19.05mm |
| Width | 12.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC259 |
| Pin Count | 16 |
| Output Type | Standard |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 57 ns |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 3 |
M74HC259B1R Overview
16-DIP (0.300, 7.62mm) contains it. Tube is the way it is packaged. It is configured with an output of Standard. This electrical device has Logic type D-Type, Addressable. The way in which this electronic part is mounted is Through Hole. With a supply voltage of 2V~6V, it operates. During operation, the temperature is set at -55°C~125°C. The 74HC series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. A device with this design has 16 terminations. There is no doubt that it belongs to the family M74HC259. In order to function, the supply voltage should be set to 4.5V. With 16 pins, it is equipped. It is a member of the HC/UH family of electronic devices. The pin configuration of the device is 16. Through Hole is the way in which this electronic part is mounted. Subcategory FF/Latches contains this part. There is a maximum voltage supply (Vsup) that reaches 6V. A total of 2/6V power supplies are required for it to operate. A voltage greater than 2V must be supplied as a power supply (Vsup). Input Lines consist of electronic circuits, and there are 3. The output current of 5.2mA makes it feature maximum design flexibility. There are 1 elements in it.
M74HC259B1R Features
16-DIP (0.300, 7.62mm) package
74HC series
8 Bits
M74HC259 family
16 pin count
16 pins
2/6V power supplies
1 elements
M74HC259B1R Applications
There are a lot of STMicroelectronics M74HC259B1R Latches applications.
- Counting
- Storage
- Shift left with parallel loading
- Counters
- Automotive Body Electronics
- Address register
- Buffer register
- Display
- Shift right register
- Synchronous frequency dividers
