M74HC299RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC299 |
| Pin Count | 20 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8-Bit |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | Universal Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 24 MHz |
| Height | 2.45mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC299RM13TR Overview
As part of the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. I have packaged it in a way that is similar to Tape & Reel (TR)'s. A 8-Bit circuit is used for achieving its superior flexibility as a result of its use of 8-Bit circuits. This electrical device has a logic type of Universal Shift Register. An electronic part such as this one is mounted in the way of the Surface Mount-axis. As far as the operating temperature is concerned, it should be higher than -55°C~125°C. High/Low output currents allow 5.2mA 5.2mA to have a maximum design flexibility. An FPGA of this type belongs to the series 74HC and belongs to the category of FPGAs. Using 2V~6V as a supply voltage, it operates. It belongs to M74HC299 family. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 20 terminations. The supply voltage should be kept above 4.5V for normal operation. It is equipped with 20 pin count. The electronic part was designed using 8 Bits. Mounted in the way of Surface Mount is this electronic part. The 20 pins are designed to be a part of it. The device belongs to the HC/UH family of electronic devices. A maximum supply voltage (Vsup) is reached at 6V. It is recommended that the supply voltage (Vsup) be greater than 2V. Power is provided by 2/6V power supplies. In this case, it is made up of 1 elements. In the configuration, it uses the trigger POSITIVE EDGE to trigger the event. It is also characterized by HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL as another characteristic. The switching power supply includes 10 input lines, which consist of electronic circuits connected to the mains and rectifier input stages.
M74HC299RM13TR Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
M74HC299 family
20 pin count
20 pins
2/6V power supplies
1 elements
M74HC299RM13TR Applications
There are a lot of STMicroelectronics M74HC299RM13TR Universal Bus Functions applications.
- Small and medium off-grid systems
- Memory devices
- Audio
- Circuits involving computation and processing
- Electric car
- Range hood
- Data transmission control
- Digital system
- Automatic watering system
- Digital Electronics
