M74HC373B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 265 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.68mm |
| Length | 25.4mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC373B1R Overview
A package called 20-DIP (0.300, 7.62mm) contains it. As a result, it has a packaging of Tube. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Through Hole method. A 2V~6V voltage supply is required for operation. The operating temperature is -55°C~125°C. An FPGA of this type belongs to the 74HC series. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. It belongs to M74HC373 family. The device works with a voltage of 4.5V for its supply voltage. 20 pins are provided. It is a member of the HC/UH family of electronic devices. With the design of the board, there are only 20 pins. A Through Hole mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part can be found within the FF/Latches subcategory. When Vsup reaches 6V, the maximal supply voltage is reached. There is 2/6V power supply for it. Ensure that the supply voltage (Vsup) is greater than 2V. There are electronic circuits attached to the 8 input lines. Its output current of 7.8mA ensures maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines.
M74HC373B1R Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
M74HC373 family
20 pin count
20 pins
2/6V power supplies
M74HC373B1R Applications
There are a lot of STMicroelectronics M74HC373B1R Latches applications.
- High-speed logic
- Audio and video switching
- Parallel Input
- Counter
- Automatic test equipment
- Parallel Input
- Hammer Device Information
- Synchronous frequency dividers
- Relay
- Serial Output Data Queuing
