M74HC373RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 800.987426mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 265 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.45mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC373RM13TR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. The voltage supply is 2V~6V. During operation, the temperature is set at -55°C~125°C. An FPGA of this type belongs to the 74HC series. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. M74HC373 is its family. The supply voltage of the device is 4.5V. The 20 pind are equipped with it. It is part of the family of electronic devices called HC/UH. 20 pins are used in its design. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 6V. The device is powered by 2/6V power supplies. A voltage greater than 2V must be supplied as a power supply (Vsup). Based on its reliable performance, this device is well suited to TAPE AND REEL. Its 7.8mA output current allows for maximum design flexibility. The binary equivalent of the input line is generated by 3 output lines. Without external influences, it consumes 4μA quiescent current. To achieve its exceptional flexibility, it relies on 8 circuits.
M74HC373RM13TR Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
M74HC373 family
20 pin count
20 pins
2/6V power supplies
M74HC373RM13TR Applications
There are a lot of STMicroelectronics M74HC373RM13TR Latches applications.
- Serial Input
- Control circuits
- Decade counting
- Bus system register with enable parallel lines at bus side
- Display driver
- Timers
- Parallel-to-Serial Data Conversion
- Counter
- Watches
- Shift left register
