M74HC373TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC373TTR Overview
20-TSSOP (0.173, 4.40mm Width) contains it. As a result, it has a packaging of Cut Tape (CT). In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. There are a number of FPGAs in this series, including this one. The electronic part in this image has 8 bits. This device is designed with 20 terminations. The family M74HC373 includes it. A 4.5V voltage supply is required for operation. The 20 pind are equipped with it. It is part of the family of electronic devices called HC/UH. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. 6V is the maximum voltage (Vsup) that can be supplied. There are 2/6V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. As a result of its reliable performance, it is well suited for TAPE AND REEL. A binary equivalent of the input line is generated by the 3 output lines. The circuit's superior flexibility is achieved through the use of 8 circuits.
M74HC373TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
M74HC373 family
20 pin count
20 pins
2/6V power supplies
M74HC373TTR Applications
There are a lot of STMicroelectronics M74HC373TTR Latches applications.
- Serial Output Register
- High-speed logic
- Up/down difference counting
- Shift left with parallel loading
- Address register
- Pattern generators
- Decade counting 7-segment decimal display
- Relay
- Shift left register
- Parallel data storage
