M74HC390B1R
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 9.071847g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | unknown |
| Frequency | 79MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC390 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 48 ns |
| Turn On Delay Time | 420 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 2 |
| Number of Output Lines | 4 |
| fmax-Min | 33 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Timing | Synchronous |
| Height | 12.7mm |
| Length | 20mm |
| Width | 7.1mm |
M74HC390B1R Overview
This is a device supplied in the 16-DIP (0.300, 7.62mm) package. The configuration of this device is based on 16terminations. The supply voltage of 4.5V permits it to operate with full flexibility. There are a total of 16 pins in all components. It is packaged in the way of Tube. As part of the circuit, there are 16pins used to connect other components. Through Holeis the way in which it is mounted. The HC/UHfamily is derived from it. The 74HCseries is well suited to a number of uses. A logic type of Counter, Decade is adopted. In this case, the operating temperature should be set to -55°C~125°C. There is a mounting type of Through Holeon this device. By providing the supply voltage of [0], it is capable of operating more reliably. The array contains elements that store 4bits each. As far as Pbfree code is concerned, the result may be yes. More related parts are available under its base part number M74HC390. To operate, the device requires a voltage of [0]. There is a minimum supply voltage (Vsup) of 2V volts. Frequency 79MHzdetermines its operation. There is 6V maximum supply voltage (Vsup) allowed. The 2input lines are used to input binary data as on/off signals. It has 4 output lines.
M74HC390B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
Operating supply voltage of 5V
Frequency of 79MHz
M74HC390B1R Applications
There are a lot of STMicroelectronics M74HC390B1R Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Binary counter/decoder
- Frequency division
- Divide-by"N" counters/frequency synthesizers
- Frequency dividing circuits
- SQUARING
- Analog multiplexing and demultiplexing
- Programmable decade counters
- Clocks
- Timers
