M74HC390M1R
| Parameters | |
|---|---|
| Package / Case | SO |
| Surface Mount | YES |
| Number of Pins | 16 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Trigger Type | NEGATIVE EDGE |
| fmax-Min | 33 MHz |
| Max Frequency@Nom-Sup | 28000000Hz |
| Load/Preset Input | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M74HC390M1R Overview
The device is packaged in the SOtype. The configuration of this device is based on 16terminations. 4.5Vis fully flexible due to its voltage supply. All component pins are equal to 16. There are 16 pins going on to connect other parts in the circuit. The HC/UHfamily is derived from it. There are 4bits of information contained in the device. These electronic devices have many important features, and DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONSis one of them. There is a temperature grade of MILITARYon this device. From the voltage source, there is a voltage of 2/6V volts. It operates at the maximum temperature of 125°C for extended periods of time with acceptable stability of its electrical characteristics. It is designed to operate over a specified temperature range with lower limit generally set at -55°C. Supply voltages can be as low as 2V volts (Vsup). Typically, the supply voltage (Vsup) is limited to 6V.
M74HC390M1R Features
Embedded in the SO package
DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS
M74HC390M1R Applications
There are a lot of STMicroelectronics M74HC390M1R Counters & Dividers applications.
- Divide-by-N counting
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- ANALOG SIGNAL PROCESSING
- MULTIPLICATION
- Control counters
- Frequency dividers
- Fixed and programmable counters greater than 10
- Counter control/timers
- SQUARE ROOT
- Analog multiplexing and demultiplexing
