M74HC40103B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TCO OUTPUT; RESET TO MAX COUNT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC401 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 31 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 38MHz |
| Timing | Asynchronous/Synchronous |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
M74HC40103B1R Overview
This device is packaged in a 16-DIP (0.300, 7.62mm) package. Using 16terminations, it can be configured. Having a voltage supply of 4.5Vallows it to operate in a highly flexible manner. A wire connects the 1elements. 16is the number of pins on all components. In this case, it is packaged as Tube. In the circuit, 16pins are used to connect other components. The Through Holeway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. -55°C~125°Cshould be set as the operating temperature. The mounting type is Through Hole. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. This device contains information in 8bits. A major feature of this electronic device is its [0]. Further related parts can be found under its base part number M74HC401. There is 2/6V voltage comes from the voltage source. Supply voltage (Vsup) can be as low as 2V. It is possible to supply voltages up to 6V volts (Vsup). There are 8 input lines that allow binary data to be input in the form of an on/off signal.
M74HC40103B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT; RESET TO MAX COUNT
M74HC40103B1R Applications
There are a lot of STMicroelectronics M74HC40103B1R Counters & Dividers applications.
- MULTIPLICATION
- Timers
- TRUE RMS-TO-DC CONVERSION
- Counter control/timers
- Fixed or Programmable Frequency Division
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- ANALOG SIGNAL PROCESSING
- SQUARE ROOT
- Timing applications
- Frequency division
