M74HC4040B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 70MHz |
| Base Part Number | M74HC404 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 220 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC4040B1R Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. It is configured with 16terminations. This device is fully flexible due to the supply voltage of [0]. In all, there are 16 pins on each component. As a result, it is packaged as Tube. To connect the circuit's other components, there are 16pins. It is mounted in the manner of [0]. In this case, it belongs to the family of [0]. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. A temperature of -55°C~125°Cshould be set for the operating environment. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 2V~6Vallows it to operate more reliably. It contains 12elements. Using the Pbfree code, the result may be yes. Further related parts can be found under its base part number M74HC404. Voltage from the voltage source is [0]. To operate, it requires a supply voltage of [0]. Supply voltage (Vsup) can be as low as 2V. The frequency of the system is 70MHz. It is possible to reach a maximum supply voltage of 6VV (Vsup). The 1input lines are used to input binary data as on/off signals.
M74HC4040B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
12 bits per element
Operating supply voltage of 5V
Frequency of 70MHz
M74HC4040B1R Applications
There are a lot of STMicroelectronics M74HC4040B1R Counters & Dividers applications.
- Programmable decade counters
- ANALOG SIGNAL PROCESSING
- Frequency dividing circuits
- Binary counter/decoder
- Divide-by"N" counters/frequency synthesizers
- Counter control/timers
- Control counters
- Timers
- Time-delay circuits
- Decade counter/decimal decode display (CD4017B）
