M74HC4051B1R

18ns, 29ns 100Ohm Analog Switches BREAK-BEFORE-MAKE M74HC405 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: STMicroelectronics
Nocochips NO: 761-M74HC4051B1R
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 813
Description: 18ns, 29ns 100Ohm Analog Switches BREAK-BEFORE-MAKE M74HC405 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Base Part Number	M74HC405
Pin Count	16
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	8μA
Nominal Supply Current	8μA
Power Dissipation	500mW
Propagation Delay	60 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer, Mux
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual
Bandwidth	120MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	200MHz
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	2pF 10pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	18ns, 29ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-50dB @ 1kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	50Ohm
Signal Current-Max	0.025A
Length	20mm
Width	7.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

M74HC4051B1R Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. Multiplexer and demultiplexer circuits have a number 8:1. Operational temperature extended around -55°C~125°C TA. Totally, there are 16 terminations. A 8 channel electronic part produces high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. It consists of 1 circuits. Try searching with M74HC405 to find analog multiplexer variants. Analog switches have 100Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 8μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. You should attach at least 1V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. A 8 input needs to be operated. 120MHz bandwidths enable data to be transferred. A Drain to Source resistance of 50Ohm is shown for this electronic part.