Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
M74HC405 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
8μA |
Power Dissipation |
180mW |
Propagation Delay |
60 ns |
Turn On Delay Time |
225 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±2V~6V |
Supply Type |
Dual |
Bandwidth |
120MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
250 ns |
Max Dual Supply Voltage |
6V |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
1V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
2pF 10pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Time (Ton, Toff) (Max) |
18ns, 29ns |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-50dB @ 1kHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.025A |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
M74HC4051TTR Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. 8:1 is the ratio of multiplexer to demultiplexer circuits. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. It is part of the design of the 16 series that this electronic component is included. The circuits in this analogue multiplexer number 1. M74HC405 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexer with a Dual supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. The switch device would be able to operate with 8μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. If you are using a dual power supply, you should attach at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating 8 inputs is required. 120MHz-bandwidths can be used to transfer data between multiplexers.
M74HC4051TTR Features
8 Channels
8μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 120MHz
M74HC4051TTR Applications
There are a lot of STMicroelectronics M74HC4051TTR Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Battery Powered Systems
- 65 V DACs
- Video signal routing
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Relay Replacement
- DSUs
- Audio/video switches
- Fault Tolerant Systems
- HDTV