M74HC4053TTR

14ns, 26ns SPDT 100Ohm Analog Switches M74HC405 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-M74HC4053TTR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 730
Description: 14ns, 26ns SPDT 100Ohm Analog Switches M74HC405 16 Pins 100nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	300mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	M74HC405
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	8μA
Power Dissipation	500mW
Propagation Delay	60 ns
Turn On Delay Time	255 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±2V~6V
Supply Type	Dual
Bandwidth	120MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	255 ns
Max Dual Supply Voltage	6V
-3db Bandwidth	200MHz
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	2pF 10pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	14ns, 26ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-50dB @ 1kHz
Switch-on Time-Max	225ns
Switch-off Time-Max	225ns
Signal Current-Max	0.025A
Height Seated (Max)	1.2mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

M74HC4053TTR Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPDT switching circuit are built. 3 circuits are used in this analogue multiplexer. M74HC405 can be used to search for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. An effective Dual supply digital multiplexer. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 8μA current. Despite this switch device's dual supply capability, its voltage should not exceed 6V. The voltage should be at least 1V if you are using dual power supplies. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical component supports 6 inputs. The data can be transferred over a wide range of bandwidths, called 120MHz bandwidths.