Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ADDRESS LATCHES |
Subcategory |
Decoder/Drivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Base Part Number |
M74HC45 |
Pin Count |
24 |
Circuit |
1 x 4:16 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Power Dissipation |
500mW |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer, Latch |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
56 ns |
Propagation Delay (tpd) |
230 ns |
Number of Input Lines |
4 |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Number of Output Lines |
16 |
Input Conditioning |
STANDARD |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
M74HC4514RM13TR Overview
In order to save board space, digital switch is located in the 24-SOIC (0.295, 7.50mm Width).In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.The multiplexers can be used for a wide range of applications since they are members of 74HC series.The basic configuration includes 24 terminations.As its base part number is M74HC45, logic switch can also be used to find its related parts.The multiplexer's system is powered by 4.5V voltage.A component pin count of 24 can be found on this turn signal switch.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.The board is configured with 24 pins.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.Normally, 2/6V is powered by a battery.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.The switches is packaged according to the way of TAPE AND REEL.Voltage levels are accepted through 4 input lines of multiplexers.A signal source has 16 output lines.It also provides improved characteristics of ADDRESS LATCHES.
M74HC4514RM13TR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
4 input lines
16 output lines
ADDRESS LATCHES
M74HC4514RM13TR Applications
There are a lot of STMicroelectronics M74HC4514RM13TR Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Night vision cameras
- Idle motor
- Code converters
- Microprocessor input/output systems
- Automation system
- Automatic health monitoring systems
- Signal router
- VGA
- Code conversion