M74HC4851YTTR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Digi-Reel® |
| Series | Automotive, AEC-Q100 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 650Ohm |
| Max Power Dissipation | 450mW |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC48 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Power Dissipation | 450mW |
| Propagation Delay | 19.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.7pF 22pF |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| RoHS Status | ROHS3 Compliant |
M74HC4851YTTR Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Digi-Reel?. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. A high-quality output is provided by the electrical component's 8 channels. This multiplexer is composed of 1 circuits. Try searching for M74HC48 variants of the analog switch ic. It has an internal resistance of 650Ohm. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 6V. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 2V. The analogue multiplexer could operate on 20μA current. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source. The series starts with Automotive, AEC-Q100.
M74HC4851YTTR Features
8 Channels
20μA Supply Current
M74HC4851YTTR Applications
There are a lot of STMicroelectronics M74HC4851YTTR Analog Switches & Multiplexers ICs applications.
- Modems
- Signal routing between systems
- Precision data acquisition
- Relay Replacement
- Microwave transmission systems
- Intelligent PBX
- Power routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDAs
- Transmit
