M74HC4852TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 650Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC48 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 2μA |
| Power Dissipation | 450mW |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6.7pF 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M74HC4852TTR Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. This electronic part can be found in the 16 series. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this multiplexer. Using the M74HC48 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 650Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 6V. Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 2μA current. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. A 8 input needs to be operated.
M74HC4852TTR Features
4 Channels
Switch Circuit: SP4T
2μA Supply Current
M74HC4852TTR Applications
There are a lot of STMicroelectronics M74HC4852TTR Analog Switches & Multiplexers ICs applications.
- Communication systems
- Imaging
- Voice over IP/DSL – Integrated Access Devices, Smart
- HDTV
- High speed data transmission line cards
- E1 Network Equipment
- Communication systems
- Fault Tolerant Systems
- Sample hold systems
- PDAs
