M74HC533RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC53 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC533RM13TR Overview
20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. It is -55°C~125°C at the operating temperature. An FPGA in this series belongs to the 74HC family. 8 Bits are used in the design of this electronic part. This device has 20 terminations. As a member of the M74HC53 family, it falls under that category. It operates with a supply voltage of 4.5V. It has 20 pins that makes it easy to use. It is a member of the HC/UH family of electronic devices. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. FF/Latches is the subcategory of this part. 6V is the maximum voltage (Vsup) that can be supplied. There are 2/6V power supplies attached to it. It is recommended that the supply voltage (Vsup) be greater than 2V. There are 8 input lines in which electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. It follows that 3 output lines are generated from the binary equivalent of the input line.
M74HC533RM13TR Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
M74HC53 family
20 pin count
20 pins
2/6V power supplies
M74HC533RM13TR Applications
There are a lot of STMicroelectronics M74HC533RM13TR Latches applications.
- Buffer register
- Multi-line decoders
- Serial Input
- Counter control
- Shift Registers
- Control circuits
- Timers
- Ring counter
- Flip-flops
- Network Switches
