M74HC533TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | M74HC53 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M74HC533TTR Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. In order for it to operate, it needs a supply voltage of 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series contains FPGAs of this type. The electronic part in this image has 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. M74HC53 is its family. The device works with a voltage of 4.5V for its supply voltage. With 20 pins, it is equipped. HC/UH is the family of this electronic device. It is designed with 20 pins. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. The part belongs to the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. There are 2/6V power supplies attached to it. The supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is well suited to TAPE AND REEL. Input lines are converted into binary equivalents by 3 output lines. 8 circuits are used to achieve superior flexibility.
M74HC533TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
M74HC53 family
20 pin count
20 pins
2/6V power supplies
M74HC533TTR Applications
There are a lot of STMicroelectronics M74HC533TTR Latches applications.
- Network Switches
- Buffer/Storage Registers
- Hammer Device Information
- Automotive Infotainment
- Address register
- Display driver
- Flip-flops
- Parallel data storage
- Pseudo-random code generators
- Decade counting
