Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Termination |
Through Hole |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
BROADSIDE VERSION OF 533 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
2.54mm |
Base Part Number |
M74HC56 |
Pin Count |
20 |
Output Type |
Tri-State |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
26 ns |
Turn On Delay Time |
12 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
33 ns |
Number of Input Lines |
8 |
Height Seated (Max) |
3.93mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
M74HC563B1R Overview
The 20-DIP (0.300, 7.62mm) package contains it. A package of Tube has been used. Tri-State is used for the output it is configured with. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. It operates with a supply voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. This FPGA is part of the 74HC series. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family M74HC56. With a supply voltage of 4.5V, it operates. There are 20 pins on it. It is a member of the HC/UH family of electronic devices. The 20 pins are designed into it. Through Hole is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 6V. The system is powered by 2/6V sources. There should be a voltage supply (Vsup) greater than 2V. An electronic circuit can be found on 8 input lines. The output current of 7.8mA makes it feature maximum design flexibility. A total of 1 elements make up this object. In addition, BROADSIDE VERSION OF 533 characterize it.
M74HC563B1R Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
M74HC56 family
20 pin count
20 pins
2/6V power supplies
1 elements
M74HC563B1R Applications
There are a lot of STMicroelectronics M74HC563B1R Latches applications.
- Parallel Input
- Serial Output Register
- Counting
- Registers
- Address register
- Storage
- Counters
- Multistage ripple counting
- Motor Drives
- Synchronous frequency dividers