M74HC573B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC57 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Gates | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.68mm |
| Length | 25.4mm |
| Width | 7.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC573B1R Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way in which it is packaged. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Based on the way of Through Hole, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. This FPGA is part of the 74HC series. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. This type belongs to the M74HC57 family. With a supply voltage of 4.5V, it operates. The 20 pind are equipped with it. It is a member of the HC/UH family of electronic devices. The 20 pins are designed into it. Electronic parts are mounted using the Through Hole method. This device has 2 ports. There is a subcategory of FF/Latches for this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. There are 2/6V power supplies required for this machine to operate. Ensure that the supply voltage (Vsup) is greater than 2V. Its 7.8mA output current allows for maximum design flexibility. A binary equivalent of the input line is generated by the 3 output lines. Without external influences, it consumes 4μA quiescent current.
M74HC573B1R Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
M74HC57 family
20 pin count
20 pins
2/6V power supplies
M74HC573B1R Applications
There are a lot of STMicroelectronics M74HC573B1R Latches applications.
- Parallel-to-Serial Data Conversion
- Motor Drives
- Display
- Buffer/Storage Registers
- Multi-line decoders
- Hammer Device Information
- Parallel data storage
- Programmable binary
- Buffer Storage
- Ring counter
