M74HC573M1R
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC57 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
M74HC573M1R Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. This package has the format of Tube. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 2V~6V. There is a temperature of -55°C~125°C at which the system operates. 74HC is the series number of this FPGA. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. It belongs to M74HC57 family. The device is operated when the supply voltage is set to 4.5V. It has 20 pins that makes it easy to use. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. During this period, the maximum supply voltage (Vsup) reaches 6V. A total of 2/6V power supplies are required for it to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Electronic circuits are represented by 8 input lines. 3 output lines provide binary equivalents of input lines.
M74HC573M1R Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
M74HC57 family
20 pin count
20 pins
2/6V power supplies
M74HC573M1R Applications
There are a lot of STMicroelectronics M74HC573M1R Latches applications.
- Synchronous frequency dividers
- TV Set-top Boxes
- Frequency dividing
- Automotive Infotainment
- Instrumentation
- Double bus register system
- Parallel data storage
- Parallel Input
- Flip-flops
- Shift right with parallel loading
