M74HC573TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC57 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC573TTR Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series is associated with this FPGA. This electronic part is designed with 8 Bits. This device has 20 terminations. M74HC57 is its family. With a supply voltage of 4.5V, it operates. The device is equipped with 20 pins. HC/UH is the family of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports that can be connected to it. This part is included in FF/Latches. It reaches 6V when the supply voltage (Vsup) reaches maximum. There are 2/6V power supplies required for this machine to operate. A voltage greater than 2V must be supplied as a power supply (Vsup). The device's reliable performance makes it a good choice for TAPE AND REEL. 3 output lines generate the binary equivalent of the input lines. Without external influences, it consumes 4μA of quiescent current. In order to achieve its superior flexibility, 8 circuits are used.
M74HC573TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
M74HC57 family
20 pin count
20 pins
2/6V power supplies
M74HC573TTR Applications
There are a lot of STMicroelectronics M74HC573TTR Latches applications.
- Pattern generators
- Double bus register system
- Counter control
- Relay
- Shift left register
- Control circuits
- OC-48 communication systems
- Shift right with parallel loading
- Timers
- Automotive Body Electronics
