M74HC590RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC59 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 280 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 280 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Number of Inputs | 5 |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 1 |
| fmax-Min | 26 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 22000000Hz |
| Count Rate | 61MHz |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC590RM13TR Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. For its configuration, 16terminations are used. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. All component pins are equal to 16. As [0], it is packaged. In the circuit, there are 16pins that connect other parts. It is mounted in the manner of [0]. The HC/UHfamily includes it. As a member of 74HC series, it is well suited for various applications. The logic type of Binary Counter is adopted. -55°C~125°Cis the recommended operating temperature. It adopts a mounting type of Surface Mount. In the case of a supply voltage of [0], it operates more reliably. It contains 8elements. Pbfree code may produce the result yes. It is important to note that TCO OUTPUT; REGISTERED OUTPUTSare really important features of this electronic device. More related parts are available under its base part number M74HC59. TAPE AND REEL is employed for its packing. As a result of the voltage source, there is 2/6V voltage. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. It is possible to provide a voltage up to 6V (Vsup). In the state of [0], it consumes quiescent current. There are 1 input lines that allow binary data to be input in the form of an on/off signal. As a result of the system receiving 5outputs.
M74HC590RM13TR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
M74HC590RM13TR Applications
There are a lot of STMicroelectronics M74HC590RM13TR Counters & Dividers applications.
- Frequency dividing circuits
- Control counters
- Binary counter/decoder
- Time delay circuits
- Digital multiplexing and demultiplexing
- Time-delay circuits
- Programmable decade counters
- Timing applications
- Time Out Timer for Consumer-Application Industrial Controls
- LINEARIZATION
