M74HC73B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| Type | JK Type |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MASTER SLAVE OPERATION |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC73 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 80MHz |
| Propagation Delay | 125 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Negative Edge |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC73B1R Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. T flip flop is configured with an output of Differential. JK flip flop uses Negative Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 2V~6V is required for operation. It is at -55°C~125°C TAdegrees Celsius that the system is operating. JK Typeis the type of this D latch. FPGAs belonging to the 74HCseries contain this type of chip. A frequency of 80MHzshould be the maximum output frequency. As a result, it consumes 2μA of quiescent current without being affected by external factors. Currently, there are 14 terminations. The M74HC73family includes it. Power is supplied from a voltage of 4.5V volts. JK flip flop input capacitance is 5pF farads. Electronic devices of this type belong to the HC/UHfamily. In this case, the electronic component is mounted in the way of Through Hole. This board has 14 pins. This device has Negative Edgeas its clock edge trigger type. The part is included in FF/Latches. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 2 circuits. Featuring the maximum design flexibility, it has an output current of 5.2mA . In addition, MASTER SLAVE OPERATIONis a characteristic of it.
M74HC73B1R Features
Tube package
74HC series
14 pins
M74HC73B1R Applications
There are a lot of STMicroelectronics M74HC73B1R Flip Flops applications.
- Buffered Clock
- Event Detectors
- ESCC
- Data Synchronizers
- Latch-up performance
- Shift Registers
- Test & Measurement
- Balanced Propagation Delays
- Functionally equivalent to the MC10/100EL29
- Shift registers
