M74HCT174RM13TR
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 56MHz |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 28ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HCT174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
M74HCT174RM13TR Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. A package named Tape & Reel (TR)includes it. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. This type of FPGA is a part of the 74HCT series. A frequency of 56MHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 4μA of quiescent current without being affected by external factors. There are 16 terminations,The M74HCT174 family contains this object. The power source is powered by 5V. Input capacitance of this device is 5pF farads. HCTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. It is designed with 16 pins. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 6bits. Its superior flexibility is attributed to its use of 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. High efficiency requires the supply voltage to be maintained at 5V. In order to operate, the chip has 6 output lines.
M74HCT174RM13TR Features
Tape & Reel (TR) package
74HCT series
16 pins
6 Bits
5V power supplies
M74HCT174RM13TR Applications
There are a lot of STMicroelectronics M74HCT174RM13TR Flip Flops applications.
- Frequency Divider circuits
- CMOS Process
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Balanced 24 mA output drivers
- Registers
- Control circuits
- Computing
- Matched Rise and Fall
- Memory
