M74HCT273B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 8 |
| Clock Frequency | 80MHz |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.68mm |
| Length | 25.4mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT273B1R Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The package Tubecontains it. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Through Holeis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 80MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 4μA quiescent energy. Terminations are 20. The M74HCT273 family contains it. A voltage of 5V provides power to the D latch. A JK flip flop with a 5pFfarad input capacitance is used here. HCTis the family of this D flip flop. The electronic part is mounted in the way of Through Hole. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. Due to its superior flexibility, it uses 8 circuits. The power supply is 5V. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 4mA.
M74HCT273B1R Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
M74HCT273B1R Applications
There are a lot of STMicroelectronics M74HCT273B1R Flip Flops applications.
- High Performance Logic for test systems
- Asynchronous counter
- Circuit Design
- Instrumentation
- Frequency Dividers
- Control circuits
- Set-reset capability
- ATE
- QML qualified product
- Synchronous counter
