M74HCT373B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 56 ns |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT373B1R Overview
A package called 20-DIP (0.300, 7.62mm) contains it. As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Through Hole is used to mount this electronic part. It operates at a voltage of 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. 74HCT is the series number of this FPGA. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. It is a member of the M74HCT373 family. A 5V voltage supply is required for operation. There are 20 pins attached to it. This electronic device is categorized as a HCT electronic device. This board has 20 pins on it, which is what it is designed for. Through Hole is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are needed to run it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The output current of 6mA makes it feature maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
M74HCT373B1R Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
M74HCT373 family
20 pin count
20 pins
5V power supplies
M74HCT373B1R Applications
There are a lot of STMicroelectronics M74HCT373B1R Latches applications.
- General-Purpose Register
- Serial Output Data Queuing
- Display
- Serial Input
- Flip-flops
- Automotive Cluster
- Bus system register with enable parallel lines at bus side
- Counter
- Counter control
- Automatic test equipment
