M74HCT373RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Voltage | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT373RM13TR Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. There is -55°C~125°C operating temperature. An FPGA in this series belongs to the 74HCT family. It is designed with 8 bits. A device with this design has 20 terminations. M74HCT373 is its family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. This electronic device belongs to the family of HCT. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 3 output lines that correspond to the binary equivalents of the input line.
M74HCT373RM13TR Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
M74HCT373 family
20 pin count
20 pins
5V power supplies
M74HCT373RM13TR Applications
There are a lot of STMicroelectronics M74HCT373RM13TR Latches applications.
- Serial Input
- Display
- Parallel Output
- Accumulator Registers
- Lamp and Display (LED)
- General-Purpose Register
- Phase comparator
- Storage
- Buffer/Storage Registers
- Bus system register with enable parallel lines at bus side
