M74HCT4852ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 400Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | M74HCT4852A |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 450mW |
| Propagation Delay | 45 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 80Ohm |
| Switch Circuit | SP4T |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT4852ADTR2G Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -55°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SP4T switching circuits. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with M74HCT4852A. This digital multiplexer has 400Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. A low voltage of 4.5V should be applied to the electronic component. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. The electrical part can be operated at 5V voltage levels. The 8 inputs need to be operated in order to work.
M74HCT4852ADTR2G Features
4 Channels
Switch Circuit: SP4T
M74HCT4852ADTR2G Applications
There are a lot of ON Semiconductor M74HCT4852ADTR2G Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Imaging
- Digital cross connects (DSX-1)
- 65 V DACs
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH/SONET multiplexers
- SONET
- Isolation
- Avionics and Military Systems
- USB 1.1 signal switching circuits
