Parameters |
Base Part Number |
M74HCT573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Ports |
2 |
Output Current |
6mA |
Number of Bits |
8 |
Propagation Delay |
36 ns |
Turn On Delay Time |
19 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
6mA 6mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Number of Gates |
8 |
Prop. Delay@Nom-Sup |
45 ns |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height |
3.676mm |
Length |
25.4mm |
Width |
7.1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HCT |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
Through Hole |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
M74HCT573B1R Overview
It is embedded in the 20-DIP (0.300, 7.62mm) package. This package has the format of Tube. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. The voltage supply is 4.5V~5.5V. The operating temperature is -55°C~125°C. The 74HCT series contains FPGAs of this type. This electronic part is designed with 8 Bits. As far as this device is concerned, it has no terminations. The family it belongs to is M74HCT573. In order to operate it, the supply voltage must be 5V. The device is equipped with 20 pins. This electronic device is categorized as a HCT electronic device. The device has 20 pins. Through Hole is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. A total of 5V power supplies are needed to run it. It is recommended that the supply voltage (Vsup) be greater than 4.5V. The 6mA output current gives it maximum design flexibility. The binary equivalent of the input line is generated by 3 output lines.
M74HCT573B1R Features
20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
M74HCT573 family
20 pin count
20 pins
5V power supplies
M74HCT573B1R Applications
There are a lot of STMicroelectronics M74HCT573B1R Latches applications.
- Parallel Input
- A/D and D/A conversion
- Parallel data storage
- Automotive HEV/EV Powertrain
- PCs and Notebooks
- TV Set-top Boxes
- Shift Registers
- Pattern Generators
- Watches
- Double bus register system