Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
74HCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
M74HCT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
59 ns |
Turn On Delay Time |
19 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
6mA 6mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
45 ns |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
M74HCT573RM13TR Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). It is packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. The 74HCT series contains FPGAs of this type. The design of this electronic part contains 8 bits. In this device, there are 20 terminations. This type belongs to the M74HCT573 family. In order to function, the supply voltage should be set to 5V. 20 pins are provided. In terms of electronic devices, this one is in the HCT family. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. It consists of 8 input lines from which an electronic circuit can be built. The device's reliable performance makes it a good choice for TAPE AND REEL. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
M74HCT573RM13TR Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
M74HCT573 family
20 pin count
20 pins
5V power supplies
M74HCT573RM13TR Applications
There are a lot of STMicroelectronics M74HCT573RM13TR Latches applications.
- Automotive Cluster
- Counters
- Serial Output Data Queuing
- Digital bus buffer
- Parallel data synchronization
- Phase comparator
- High-speed logic
- Bus system register with enable parallel lines at bus side
- Decade counting 7-segment decimal display
- A/D converters