M74HCT574TTR
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 24 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 36ns @ 4.5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M74HCT574TTR Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74HCT series. You should not exceed 50MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the M74HCT574 family. Power is supplied from a voltage of 5V volts. There is 5pF input capacitance for this T flip flop. This D flip flop belongs to the family of HCT. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 8bits are used in this part. The superior flexibility of this circuit is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. A total of 2ports are embedded in the D flip flop. In order to ensure high efficiency, the supply voltage should remain at 5V. It operates with 3 output lines.
M74HCT574TTR Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
M74HCT574TTR Applications
There are a lot of STMicroelectronics M74HCT574TTR Flip Flops applications.
- Supports Live Insertion
- ATE
- Storage registers
- Event Detectors
- Differential Individual
- Guaranteed simultaneous switching noise level
- Bus hold
- High Performance Logic for test systems
- Matched Rise and Fall
- Counters
