M74HCT74RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 48MHz |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT74RM13TR Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The 74HCTseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 48MHz. This process consumes 2μA quiescents. Terminations are 14. The M74HCT74 family contains it. A voltage of 5V is used to power it. Its input capacitance is 5pF farads. The electronic device belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. This board is designed with 14pins on it. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. Using 2 circuits, it is highly flexible. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 1 output lines.
M74HCT74RM13TR Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
M74HCT74RM13TR Applications
There are a lot of STMicroelectronics M74HCT74RM13TR Flip Flops applications.
- Shift Registers
- Latch-up performance
- Reduced system switching noise
- Clock pulse
- ESD performance
- Frequency division
- High Performance Logic for test systems
- QML qualified product
- Consumer
- Count Modes
