M74VHC1GT66DFT2G
| Parameters | |
|---|---|
| Max Power Dissipation | 150mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74VHC1GT66 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Power Dissipation | 150mW |
| Throw Configuration | SPST |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 40 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 40Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 40Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
M74VHC1GT66DFT2G Overview
This electronic part is conveniently packaged in 5-TSSOP, SC-70-5, SOT-353, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 5. By its 1 channels, the electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 5 series. A SPST - NO switching circuit is used for these analog switches. Using the M74VHC1GT66 search parameter, you can discover variants of the switch. There is 40Ohm internal resistance in this digital multiplexer. The functions of 5 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. Operating 1 inputs is required. A 150MHz-bandwidth can be used for data transfer.
M74VHC1GT66DFT2G Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 180MHz
Bandwidth: 150MHz
M74VHC1GT66DFT2G Applications
There are a lot of ON Semiconductor M74VHC1GT66DFT2G Analog Switches & Multiplexers ICs applications.
- DVD-R
- New designs requiring multiplexer functions
- PBXs
- PDAs
- Remote wireless modules
- Audio/video switches
- Intelligent PBX
- Cable Modem
- Automatic test equipment
- MP3 players
