MAL218197403E3
| Parameters | |
|---|---|
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 10V |
| Capacitance | 120μF |
| Polarity | Polar |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Ripple Current | 2.3A |
| Life (Hours) | 5000 hours |
| Impedance | 27mOhms |
| Ripple Current @ High Frequency | 2.3A @ 100kHz |
| Height Seated (Max) | 0.232 5.90mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.260Lx0.260W 6.60mmx6.60mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | 181 CPL |
| Size / Dimension | 0.248Dia 6.30mm |
The capacitance can run at the range of 120μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to 181 CPL series. This part is mounted in the way of Surface Mount. The type of the MAL218197403E3 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Vishay BC Components MAL218197403E3 is suitable to conduct the ripple current at 2.3A. MAL218197403E3 Capacitor is mounted by Surface Mount. MAL218197403E3 Capacitor. Voltage - Rated often has values of 10V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
181 CPL Series
Capacitance: 120μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of MAL218197403E3 Aluminum Polymer Capacitors.
Typically, MAL218197403E3 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Lighting Ballast
- PFC
- UPS Buffering
- DC/DC, DC/AC, and AC/AC converters
- Voltage Doubling
- Coupling or blocking
- To enhance power efficiency
- Power Factor Correction
- Flashtube Ignition
- Motor Start
