MAX1044CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1044 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 30μA |
| Output Configuration | Positive or Negative |
| Current - Output | 20mA |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz |
| Supply Current-Max (Isup) | 0.2mA |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1044CSA+T Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. A voltage regulator consists of 8 terminations. A SWITCHED CAPACITOR CONVERTER analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. DC DC switching regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. Keeping dc to dc voltage regulator's operating temperature at 0°C~70°C TA is essential when operating. A DC-DC switching regulator such as this one switches at 10kHz. Regulator 1.5V can operate with dc to dc voltage regulator's minimum input voltage 1.5V. The adjusting voltage regulator's output voltage (Min/Fixed) is -Vin nVin Vin/2. DC DC switching regulator's maximum design flexibility comes from its output current of 20mA. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. An input voltage of 5V is required to meet the requirements of the switching regulator operation. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. DC/DC regulators such as this one belong to the MAX1044 family of products. Voltage regulator is capable of giving voltage at 20V volts. For switching regulator operation, 8 pins are used. 1.5V V supply voltage ensures reliable performance of adjusting voltage regulator. As long as the supply voltage is greater than 10V, the voltage regulator 12v will operate correctly.
MAX1044CSA+T Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX1044CSA+T Applications
There are a lot of Maxim Integrated MAX1044CSA+T Voltage Regulators applications.
- Handheld GPS
- Servo drive system
- Emergency lighting monitoring equipment
- Motor controller circuits
- Scientific testing
- Product burn-in
- Milling machines
- Sensitive electronic devices
- Die casting equipment
- Lathes
