MAX11048ETN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 3.81W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX11048 |
| Pin Count | 56 |
| Operating Supply Voltage | 5.25V |
| Polarity | Unipolar |
| Power Supplies | 3/55V |
| Configuration | S/H-ADC |
| Number of Channels | 6 |
| Nominal Supply Current | 36mA |
| Number of Bits | 16 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 2 B |
| Sampling Rate | 250 ksps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 2.7V~5.25V |
| Number of Analog In Channels | 6 |
| Sampling Rate (Per Second) | 250k |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0031% |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 1.5 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5.02V |
| Signal to Noise Ratio (SNR) | 92.3 dB |
| Height Seated (Max) | 0.8mm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX11048ETN+ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 56-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 56 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 6 channels.The is equipped with 56 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 56 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11048 family.There are several types of supply, categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Mounting the ADC converter is possible with Surface Mount.This electrical digital converter operates from a supply voltage of 5.25V.The maximal analog input voltage of this electrical AD converter is 5.02V.The ADC converter operates from 3/55V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.81W.The number of channels is growing strong/weak: 6.The conversion rate of this electrical AD converter is calculated as 1.5 Msps.Simultaneous Sampling can be ensured when operating.
MAX11048ETN+ Features
1 Functions
56 basic kinds of terminations
56 pin count
3/55V power supplies
MAX11048ETN+ Applications
There are a lot of Maxim Integrated MAX11048ETN+ ADC applications.
- Transducer
- Communication test equipment
- High Speed Data Acquisition for PCs
- Audio/Video devices
- Medical Instrumentation and medical imaging
- Battery Operated Systems
- Rotary encoder
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Medical Imaging
- Scientific instruments
